The Extra 260 3D 480 ARF is one of the first E-flite® planes to use a new construction technique that eliminates unnecessary weight without sacrificing any strength. This super-lightweight construction, combined with its generous wing area, results in exceptionally light wing loading. Plus, its firewall is designed to accept E-flite’s powerful Park 480 Brushless Outrunner Motor, without modification. It all comes together to give you a fantastic flying 3D airplane without limits and with nothing but possibilities.
- Generous wing area for lighter wing loading
- Large control surfaces for precise control in high-alpha flight
- Exceptionally lightweight balsa and plywood construction
- Designed for use with E-flite’s Park 480 brushless outrunner motor
- Factory-painted fiberglass cowl and wheel pants
- Aluminum landing gear and steerable tail wheel
- Plug-in wings for easy transport
- Assembles in just a few evenings
- Covered in genuine UltraCote® and UltraCote Lite
WARNING: Digital sub-micro servos have a higher current draw and may overload the BEC of the recommended Electronic Speed Control (ESC). Always be sure to position the ESC for maximum airflow since cooling can significantly aid in the performance of the BEC. Use of a separate BEC (like the UBEC) or receiver battery pack may also be necessary.
Use of servos other than those we recommend may overload the BEC of the recommended Electronic Speed Control (ESC). We suggest the use of only the servos we recommend when utilizing the recommended ESC’s BEC, or the use of a separate BEC (like the UBEC) or receiver battery pack when using other servos.
You will need... 6-channel transmitter (for proper mixing and dual rate capabilities) Micro receiver 4 sub-micro servos Park 480 BL Outrunner Motor 40A Brushless ESC 12x6 Electric Battery & Charger
ingspan: 43 in (1090mm) Overall Length: 40 in (1015mm) Wing Area: 375 sq in (24.2 sq dm) Flying Weight: 26–29 oz (740–820 g) Motor Size: Park 480 BL Outrunner Radio: 6 channels or more for proper mixing Servos: Sub-micro (4) Trim Scheme Colors: Pearl Purple (HANU847), Bright Yellow (HANU872), Silver (HANU881), Lite Transparent Clear (HANU964), Lite White (HANU973) CG (center of gravity): 3 inches (75mm) to 3 1/8 inches (79mm) Prop Size: 12x6 Electric Spinner Size: 1 3/4 in Hardware Included: Yes Speed Control : 35A-40A Brushless Recommended Battery: 1320-2100mAh 11.1V 3-cell Li-Po Control Throw (Ailerons): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm) Control Throw (Elevator): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm) Control Throw (Rudder): Low 1-1/2-inch (38mm) or High 2-1/2-inch (64mm) Scale: Park Flyer Approx. Assembly Time: 4-6 hours